Budget Zero-nicotine liquids picks under 60 in Liverpool (v4)
Zero-nicotine liquids advice for Liverpool, covering DIY liquids, what to look for and where the trade-offs actually sit.
Most Liverpool buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Expect roughly 1365 full puffs from a charge at 20 mg/ml, based on average session length in our testing.
We spent weeks putting zero-nicotine liquids options through their paces so the recommendations here reflect real use. Charging over Type-C fast charge takes about 74 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
In Liverpool, availability of the 1.0 Ω mesh coil is the practical bottleneck, not the device itself. The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.0 Ω mesh mark before the profile flattens and a swap makes sense.
Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying. Worth noting that the Q-Plus takes a small amount of care to keep clean, which we cover in the maintenance section below. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price. Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The 4.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Two things to check before ordering: the Type-C fast charge socket on the base and whether the 1.0 Ω mesh coil is the newer generation. For disposable buyers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber.
Specifications
These are the figures that matter day to day, and the ones worth comparing across models.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 1500 mAh |
| Power range | 150 W |
| Liquid capacity | 4.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 0.6 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | zinc alloy |
| Charge port | Type-C fast charge |
| Connector | Q-Plus |
| Airflow | ring control |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Cola Zero: sweet, fizzy, described as cola sweetness with a light fizz. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.