Zero-nicotine liquids upgrades and spare parts (Vaporesso Tarot) (v4)
Zero-nicotine liquids advice for Liverpool, covering steeping, what to look for and where the trade-offs actually sit.
The Liverpool market for zero-nicotine liquids has grown steadily, and the choice on offer now is genuinely broad. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
Anyone who has compared zero-nicotine liquids options in Liverpool quickly learns that specification lists only tell part of the story. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal.
Charging over Micro-USB takes about 85 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.2 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin X earns its keep: the 1500 mAh cell holds a usable charge for most of a day at 40 and recharges over Micro-USB.
Comparing this against a 55:45 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 3.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 739 full puffs from a charge at 3 mg/ml, based on average session length in our testing.
The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Battery behaviour is where the Innokin X earns its keep: the 1500 mAh cell holds a usable charge for most of a day at 40 and recharges over Micro-USB.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.2 Ω mesh mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 1.2 Ω mesh coil is the practical bottleneck, not the device itself.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin X |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 1500 mAh |
| Power range | 40 W |
| Liquid capacity | 3.0 ml |
| Coil | 1.2 Ω mesh |
| Bottle size | 1.3 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | zinc alloy |
| Charge port | Micro-USB |
| Connector | 510-X |
| Airflow | ring control |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Lemon Lime Soda: citrusy, crisp, described as zesty lemon over lime with gentle carbonation. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.2 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.2 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Availability shifts often, so check the current listing before committing to a large order.