Zero-nicotine liquids maintenance guide (Vapouriz Max) (v2)
Zero-nicotine liquids advice for Liverpool, covering versus, what to look for and where the trade-offs actually sit.
Budget matters in Liverpool, but with zero-nicotine liquids the cheapest option is rarely the one that lasts. Battery behaviour is where the Innokin X earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 150 and recharges over Micro-USB.
The Liverpool market for zero-nicotine liquids has grown steadily, and the choice on offer now is genuinely broad. Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying.
Charging over Micro-USB takes about 39 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.0 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin X earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 150 and recharges over Micro-USB.
In Liverpool, availability of the 1.0 Ω mesh coil is the practical bottleneck, not the device itself. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 50:50 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. For cloud chasers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
The build quality on Innokin X is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Micro-USB takes about 39 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Vapour production is more than adequate at 150, and pushing beyond that adds heat rather than anything worth carrying. We would pair the Innokin X with a 50:50 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. The throat hit is noticeably firmer than a 50:50 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | Innokin X |
|---|---|
| Brand family | AEKU |
| Battery capacity | 3000 mAh |
| Power range | 150 W |
| Liquid capacity | 1.6 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 30 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 10 mg/ml |
| Material | polycarbonate |
| Charge port | Micro-USB |
| Connector | magnetic contact |
| Airflow | adjustable sliding |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.